Difference between revisions of "F19: Infinity Mirror"

From Embedded Systems Learning Academy
Jump to: navigation, search
(Design And Architecture)
(Product Enclosure)
Line 329: Line 329:
 
|[[File:3D.png|400px|thumb|right|3D View]]
 
|[[File:3D.png|400px|thumb|right|3D View]]
 
|}
 
|}
 +
 +
===Final 3D Package===
 +
[[File:Final Setup.jpeg|thumb|300x300px|center|Infinity Mirror: Final Setup]]
  
 
=='''RGB LED Matrix'''==
 
=='''RGB LED Matrix'''==

Revision as of 19:24, 18 December 2019

Abstract

The main theme of the project is to build an interactive embedded system consisting of two entertainment modes - Music and Gaming. On the music mode, the MP3 decoder module reads songs from an SD card on the MCU board and plays the music through a speaker. It deals with the convergence of various services such as playing a game with background music, control volume, switch and pause/play songs. While the song is being played, audio frequency spectrum bands based on music tune are displayed on the LED Matrix band visualization etc. On the game mode, a fruit smashing game called “Fruit Fury” is implemented where the user needs to orient the MCU board in a direction according to where the fruit appears on the LED matrix. Alongside, the user can listen and switch songs. To achieve the above functionalities, various elements such as Audio Decoder, Audio frequency analyzer, 32x64 RGB LED Matrix and HC-05 bluetooth module and Android application are integrated.

Block Diagram of Infinity Mirror

Introduction & Objectives

The key features supported by the system is real-time orientation recognition & trigger respective actions in 2 modes - MP3 mode and Game mode.

MP3 MODE:

1. Determine the accelerometer sensor values based on the orientation of the board and perform music control such as play, pause, volume control and changing songs.

2. In response, retrieve the data from the SD Card & communicate to the audio decoder for appropriate audio streaming.

3. Also implemented interaction with HC-05 bluetooth module through a customized mobile application and provide same operations.

4. Display frequency spectrum bands in sync to the tune of the song played.

GAME MODE - Fruit Fury:

1. Determine the accelerometer sensor values based on the orientation of the board and hit the fruit in corresponding direction.

2. Incorporating provision on the board's switches to change to next or previous song.

3. Also implemented interaction with HC-05 bluetooth module through a customized mobile application and play the game through the same.

Project Objectives

     1. Audio Decoder - Fetches song data from the SD card and plays it over a speaker.
     2. RGB LED Matrix - Display frequency bands on music mode or view the game on game mode.
     3. Audio Frequency Analyzer - To convert the audio data into 7 spectrum bands which is then displayed as individual colored bands on the LED matrix.
     4. Bluetooth HC-05 - Interfaces the system using Bluetooth to an Android application. 

Team Objectives

     1. Learn each and every module as much as possible, in order to develop an overall product.
     2. Understand the proper use of queues and semaphores in order to send/receive the data between multiple tasks.
     3. Learn to integrate all modules and ensuring smooth transition, communication and context switching at desired time intervals.
     4. Document and track all the bugs encountered during development and learn to update git repository after every fix.

Team Members & Technical Responsibilities

TEAM INFINITY MIRROR
  • Ganesh Ram
    • Interfacing of LED Matrix and driver design
    • Game logic design
    • Audio frequency spectrum logic on LED
    • Packaging
  • Niket Naidu
    • Android & Bluetooth Application
    • OLED Interfacing and Designing
  • Vidushi Jain
    • Bluetooth Communication
    • Interfacing of Gesture & Accelerometer Sensors
    • Hardware Designing & PCB Integration


Administrative Responsibilities

Administrative Roles
  • Team Lead
Aakash Chitroda
  • Finance Manager
Niket Naidu
  • Git Repository Manager
Vidushi Jain
  • Wiki Report Manager
Vidushi Jain

Ganesh Ram

  • Bill of Materials Manager
Ganesh Ram

Team Deliverables Schedule

WEEK

START DATE

END DATE

TASK DETAILS

STATUS

1 15 Oct 2019 22 Oct 2019
  • Create and establish GitLab repository
  • Establish slack channel and invite Preet
  • Look through previous years projects and study it
  • Distribute major roles among team members
Completed
Completed
Completed
Completed
2 23 Oct 2019 29 Oct 2019
  • Create a Bill of Materials
  • Select and order Parts
  • Review Data-sheet and Interfacing Of LED Matrix(Ganesh)
  • Review Data-sheet for Gesture sensor(Vidushi)
  • Make Repo on Gitlab for all modules - Follow Naming Convention.
Completed
Completed
Completed
Completed
Completed
3 30 Oct 2019 5 Nov 2019
  • Review Data-sheet of Audio MP3 shield(Aakash)
  • Start Soldering for LED matrix and MP3 Shield
  • Start Soldering of Headers for MP3 Shield & decoder
  • Environmental setup of Android & Web applications(Niket)
  • Implementation of Gesture Detection (Vidushi)
  • Implementation of displaying text and basic shapes on LED Matrix (Ganesh)
Completed
Completed
Completed
Completed
Completed
Completed
4 6 Nov 2019 12 Nov 2019
  • Implementation of OLED Driver(Niket)
  • Initialization the Audio Decoder through SPI communication and read manufacturer ID
  • Implementation of random frequency bands on LED matrix (Ganesh)
  • Implementation of communication Between two task(gesture_detect & LED_Display) using queues and semaphores (Vidushi)
  • Display Gesture Sensor Directions on OLED in a Text (Vidushi & Niket)
  • Read Song from SD Card
Completed
Completed
Completed
Completed
Completed
Completed
5 13 Nov 2019 19 Nov 2019
  • Circuit Simulation in Diptrace/Eagle Tool.
  • PCB Layout Design in Diptrace/Eagle Tool.
  • Finalize Components placement on PCB.
  • Read Song from SD Card and send to MP3 Shield
  • Receive Values from audio spectrum and send to display task to display on LED Matrix.(Aakash & Ganesh)
  • Interface OLED with onboard buttons to access the list of songs (Niket)
  • Developing logic for the ball movement and translating hand-gesture control into LED movement.(Ganesh)
Completed
Completed
Completed
Completed
Completed
Completed
Completed
6 20 Nov 2019 26 Nov 2019
  • Interfacing of all modules sensors, bluetooth , MP3 and LED Matrix
  • Test whole implementation after integration of all modules
  • Test for stack overflow and system crash
  • Debug and Test the Play/Pause/Stop functionality of MP3 player
  • Integrate fruit Fury game logic
  • Update Final Wiki Schedule.
Completed
Completed
Completed
Completed
Completed
Completed
Completed
8 27 Nov 2019 3 Dec 2019
  • Additional Feature week
  • Establish Bluetooth communication of Device and Mobile APP
  • Develop UI on Android application.
  • Add Play/Pause/Stop and Song selection functionality to the APP.
  • Update Wiki with new details and information.
  • Enhanced game logic and integrated song play feature in game
Completed
Completed
Completed
Completed
Completed
9 4 Dec 2019 10 Dec 2019
  • TESTING - CRITICAL WEEK
  • Packaging of hardware board and related components.
  • Check overall robustness of the complete system.
  • Establish complete connection on PCB
  • Update wiki with details.
Completed
Completed
Completed
Completed
Completed
10 11 Dec 2019 17 Dec 2019
  • All hands on testing and final bug fixes.
  • Check for tuning or calibration of sensors if required.
  • Complete end-to-end testing for various scenarios and conditions.
  • Create the semester long project activity video and upload to YouTube.
  • Update and finalize wiki.
Completed
Completed
Completed
Completed
Completed
11 18 Dec 2019
  • DEMO: Final Project
  • SUBMISSION: Final Project Wiki
Completed
Completed

Bill of Materials (General Parts)

PART NAME

PART MODEL & SOURCE

QUANTITY

COST PER UNIT (USD)

  • Micro-Controller Eval-Boards
  • LPC 4078 (Purchased from Preet Kang)
  • 1
  • 50.00
  • Audio decoder Breakout Board
  • 1
  • 26.95
  • Audio Analyzer
  • 1
  • 19.00
  • RGB LED matrix
  • 1
  • 49.95
  • Power supply
  • 1
  • 12.95
  • Audio Speakers
  • 3.5mm Jack Stereo Speakers
  • 1
  • Own
  • PCB parts and other Miscellaneous parts
  • Anchor Electronics and Digikey
  • 1
  • 50.00
  • 2 way mirror
  • 1
  • 7.64
  • PCB Fabrication
  • 5
  • 29.53


Printed Circuit Board

Design And Architecture

We have designed the custom PCB using Eagle Software and as well as one prototype board in which we have connected all the modules with SJ-Two board. PCB was sent to fabrication to JLCPCB China which provided PCB with lead time of 1 week. We have implemented 2 layers of PCB with all of the parts in top layer.

Components Placements on PCB and on Prototype Board

     1. One SJ-Two board is fitted onto the top of the 3D printed lid cover which with a slot opening for 2x40 IDC cable.
     2. MP3 Decoder is connected with SJ-Two board and will be place on the right side of PCB and as well as on Prototype board.
     3. Bluetooth Module needs only 4 pins to connect with SJ-Two and goes to UART3 and placed on the top left of the board.
     4. LED Matrix is connected using 2x8 IDC cable pins on the top left side of the board.
     5. Audio Frequency Analyzer is placed on the bottom side of PCB.
     6. Power supply of 5v and 3.3v provisions are made on the bottom left side of PCB.
Top Layer PCB Design On Eagle Software
Bottom Layer PCB Design on Eagle Software
PCB Top Layer
PCB Bottom Layer

Infinity Mirror's Internal Circuit

Infinity Mirror: Internal Circuit of Embedded Entertainment Box

Product Enclosure

To facilitate easy and convenient gaming experience and also act as an effective audio controller, a single 3D printed enclosure was designed which is spacious enough to accommodate the MCU modules like bluetooth, audio frequency analyzer and MP3 decoder on the PCB.

Top View
3D View

Final 3D Package

Infinity Mirror: Final Setup

RGB LED Matrix

A 32 x 64 RGB LED Matrix will be powered up through a 5V/4A DC adapter and is interfaced with the board to play the game 'Fruit Fury' with desired background song in the game-mode and to display the frequency bands and other relevant messages such as "Next", "Previous" and "Pause" in the music-mode. Only the INPUT IDC connector will be used because we are not cascading multiple matrices. The matrix has 2 planes (upper and lower), both of which will be programmed separately. In order to set RGB color data for each pixel in plane 1 (top half of the display) we use R1, G1 and B1 pins and for plane 2 we use R2, G2 and B2. By setting and resetting the CLOCK pulse, color data is set for every pixel in the row. Then the LATCH is set to mark end of the row and reset to move to next row. All of these steps are repeated at very less time intervals so that the human eye perceives it as one complete frame (Persistence of Vision).

Below is the description of the pins:

  • R1 -> Sets upper panel's Red data
  • G1 -> Sets upper panel's Green data
  • B1 -> Sets upper panel's Blue data
  • R2 -> Sets lower panel's Red data
  • G2 -> Sets lower panel's Green data
  • B2 -> Sets lower panel's Blue data
  • A -> Sets row bit 0
  • B -> Sets row bit 1
  • C -> Sets row bit 2
  • D -> Sets row bit 3
  • CLK (Clock) -> Set to access each pixel
  • LAT (Latch) -> Set to mark comletion of one row
  • nOE (Output Enable) -> Set to switch the LEDs off when transitioning from one row to the next
  • GND -> Ground pins to be connected with board's GND.

Below are the technical specifications:

  • Pitch -> 4 mm
  • Resolution -> 32 x 64 = 2048 dots
  • Panel dimensions (l x b x h) in mm -> 256 x 128 x 13
  • Working voltage/current rating -> 5v / 4A (max)
  • Scan rate - 1/16
  • Pixel component configuration (R,G,B) -> 1,1,1
  • Weight -> 0.24 kg

Hardware Design

The hardware involves 5V/4A DC power supply adapter, barrel jack connectors and IDC cables to power up the LED matrix and communicate with the board. Below is the pin interfacing diagram.

LED Matrix Pin Diagram

Software Design

1. Fruit Fury - Game mode

There are 2 tasks involved to ensure functioning of the game.

a) Task 1:

  • Display the game's title screen. On pressing the onboard switch (SW1), game begins.
  • Also used to display game over screen / win screen.

b) Task 2:

  • Enter into game mode to play the game.
  • Read accelerometer values (board orientation) and render game frame.
  • Detect the player's board movement, compare it with fruit's location.
  • Display score, lives and smash effects.
  • Press another switch (SW0) to stop game and return to title screen or to restart the game once it is over.

Game rules:

a) Game comprises of 3 levels (level 2 on reaching score 15 and level 3 on reaching score 30) and 5 lives in total.

b) Primary objective is to tilt the board to the direction (North West, North East, South West or South East) in which the fruit appears in order to smash it.

c) Score increases by 1 point for smashing each fruit.

d) Bombs start appearing after completion of level 1, which costs a life when hit.

e) Level 3 is faster so make sure you tune your reflexes up.

f) Reach score 50 to win the game.

Bonus:

a) Streaks are rewarding. Smash 10 fruits straight up to win an extra life.

b) Look out for star fruits. Hit them to gain +2 points.

Choose your song to take all the inspiration you can and start smashing!

2. Music mode

a) Press the button to enjoy music-only mode. Graceful audio spectrum bands are displayed that dance to the tune of the chosen song.

b) A display is prompted to the user whenever music is paused or changed to next or previous song.

Implementation

LED Driver

1. Initialize the LED matrix by configuring necessary pin directions.

2. Disable Output Enable (OE) GPIO before feeding matrix data.

3. Select the required row by setting bits on A, B, C, D GPIO pins.

4. Loop through the pixels (columns) in the selected row and set the pixel color on R, G, B GPIO pins.

5. Set zero on R, G, B GPIO pins to mask that particular pixel.

6. Set and Reset the clock for pushing the R, G, B bits for each column.

7. Issue latch to mark the row's completion and reset latch before going to next row.

8. Follow the steps 2 to 7 for other rows.

    for (uint8_t row = 0; row < (MAX_ROW / 2); row++) {
      disableOE();
      set_row(row);
      for (uint8_t col = 0; col < MAX_COL; col++) {
        LPC_GPIO0->PIN |= (1 << CLK);
        set_color_bottom(game_matrix[row + (MAX_ROW / 2)][col]);
        set_color_top(game_matrix[row][col]);
        LPC_GPIO0->PIN &= ~(1 << CLK);
      }
      LPC_GPIO0->PIN |= (1 << LAT);
      LPC_GPIO0->PIN &= ~(1 << LAT);
      enableOE();
      vTaskDelay(1);
    }


Fruit Fury - Game mode

1. Generate the fruit's initial coordinate using random function (used srand() with time value as seed to get random pattern sets).

2. Construct the LED matrix array by drawing the fruit and borders.

3. Push the entire matrix data to LED driver to display the constructed matrix frame.

4. Then read the player's orientation and match with fruit's direction.

5. Modify game parameters (score, lives and level) based on player's results.

6. Stop game if all lives are over and display game over screen by switching to game init task (Task 1).

    /* Push button to exit game */
    if (LPC_GPIO0->PIN & (1 << SW0))
      is_start_game = false;

    if (is_start_game == true) {
      /* Generate fruit's initial coordinate position */
      get_fruit_begin_coord(&row_pt, &col_pt, &quadrant);
      /* Generate final frame by considering fruit object at that position */
      construct_game_matrix(row_pt, col_pt);
      /* Draw final frame matrix of the game */
      draw_final_game_frame();
      /* Get the board direction from the user and increment score count */
      compute_game_params(row_pt, col_pt, quadrant);
    } else
      vTaskResume(display_game_init_screen_t);

Spectrum display - Music mode

1. Read the audio frequency values from the graphic equalizer task and store it as an array.

2. Based on value of each frequency band, assign a height of the band (in pixels) to be drawn on the LED matrix.

3. Set a unique color for each band.

3. Push the entire matrix data to LED driver to display the constructed matrix frame.

4. Repeat steps 1 to 3 at required intervals to display repeating bands.

for (row = MAX_ROW - 1; row >= 1; row--) {
    for (col = 7; col <= 62; col++) {
      if ((row >= (MAX_ROW - band_height[0])) && col >= 7 && col <= 13 &&
          band_num <= 0) {
        band_matrix[row][col] = RED;
      }
      if ((row >= (MAX_ROW - band_height[1])) && col >= 14 && col <= 20 &&
          band_num <= 1) {
        band_matrix[row][col] = GREEN;
      }
      if ((row >= (MAX_ROW - band_height[2])) && col >= 21 && col <= 27 &&
          band_num <= 2) {
        band_matrix[row][col] = YELLOW;
      }
      if ((row >= (MAX_ROW - band_height[3])) && col >= 28 && col <= 34 &&
          band_num <= 3) {
        band_matrix[row][col] = BLUE;
      }
      if ((row >= (MAX_ROW - band_height[4])) && col >= 35 && col <= 41 &&
          band_num <= 4) {
        band_matrix[row][col] = PURPLE;
      }
      if ((row >= (MAX_ROW - band_height[5])) && col >= 42 && col <= 48 &&
          band_num <= 5) {
        band_matrix[row][col] = CYAN;
      }
      if ((row >= (MAX_ROW - band_height[6])) && col >= 49 && col <= 55 &&
          band_num <= 6) {
        band_matrix[row][col] = WHITE;
      }
    }
  }

MP3 Decoder

Hardware Design

MP3 Decoder Pin Diagram

Software Design

Implementation

Sensors Interface

We have worked on two sensors for accessing our entertainment box i.e. Gesture Sensor and Accelerometer. The SJ-Two board has both sensors on board sensor which is interfaced on the I2C bus. Accelerometers are electromechanical devices that sense either static or dynamic forces of acceleration. Static forces include gravity, while dynamic forces can include vibrations and movement. The measurements are on 3-axis and these values can be calibrated to find the desired values.

In our project, an accelerometer is for controlling Controls in the MP3 Mode like PLAY,PAUSE,PLAY Next Song and Back to Previous Song.However in Game Mode we are playing our fruit fury game using Orientation sensor for Smashing fruits coming in Directions South East, South West ,North East and North West and We were using Gesture on SJ-Two Board for gesture recognitions Left, Right, UP and Down to change the configuration in MP3 Mode but after implementation we have realised that giving gesture is more complicated then getting signals from orientation.

Hardware Design

APDS9960 & MMA8452Q on board Sensors

Software Design

MMA8452Q Software Design

Implementation

The MMA8452Q has an orientation detection algorithm with the ability to detect all six orientations but we are using only 4 orientations i.e. Portrait Up, Portrait Down,Landscape Left and Landscape Right .The transition from portrait to landscape is fixed with a 45° threshold angle and a ±14° hysteresis angle. This allows the for a smooth transition from portrait to landscape at approximately 30° and then from landscape to portrait at approximately 60°.


Portrait Orientation

We have used the following register settings to configure the sensors and getting all 4 directions and Orientation.

Registers of APDS9960


After reading the registers we are just performing the actions as per the Orientation detected.

Registers of MMA8452Q


void perform_action_on_orientation(void *p) 
{
 orientation_e value;
 while (1) 
 {
   value = GetOrientation();
   switch (value)
   {
   case Portrait_UP: // Prev Song
     printf("Direction Left\n");
     xSemaphoreGive(sem__prev_song);
     break;
   case Portrait_DOWN: // Next Song
     printf("Direction Right\n");
     xSemaphoreGive(sem__next_song);
     break;
   case Landscape_LEFT: // Resume/Play/
     printf("Direction Up\n");
     vTaskSuspend(handle__play_song);
     vTaskSuspend(handle__freq_bands);
     song_status = PLAY;
     break;
   case Landscape_RIGHT: // Pause/Stop/Volume Decrease
     printf("Direction Down\n");
     vTaskResume(handle__play_song);
     vTaskResume(handle__freq_bands);
     song_status = PAUSE;
     break;
   default:
     break;
   }
   vTaskDelay(50);
 }}

OLED Screen

Software Design

The open source package u8g2 has been used. There are already ready made functions for various OLED Drivers. The indepth setup guide can be found here

Implementation

The u8g2 library is a very robust library which means that this code can be extended for any microcontroller as long as the interface is written properly.

We needed to write 2 main functions, outlined below, i.e byte_cb and gpio_and_delay_cb using the function prototype `uint8_t u8x8_lpc_gpio_and_delay(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)`.

Since the SJ2 Board is connected to the OLED Screen on the SPI1 Bus we also need to write the SPI1 driver, mainly a method to that sends data over SPI to the Slave device i.e the OLED Screen

Initializing the u8g2 for LPC4078

// Created a file `u8g2_wrapper.h

static gpio_s dc;
static u8g2_t u8g2;

void u8g2_wrapper__init(gpio_s *dc_pin) {
  u8g2_Setup_ssd1306_128x64_vcomh0_1(&u8g2, U8G2_R0, u8x8_byte_4wire_hw_spi, u8x8_lpc_gpio_and_delay);
  u8g2_InitDisplay(&u8g2);
  u8g2_SetPowerSave(&u8g2, 0);

  dc.pin_number = dc_pin->pin_number;
  dc.port_number = dc_pin->port_number;
}

u8g2_t *u8g2_wrapper__get_instance() { return &u8g2; }

uint8_t u8x8_lpc_gpio_and_delay(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr) {
  switch (msg) {
  case U8X8_MSG_GPIO_AND_DELAY_INIT:
    delay__ms(1);
    break;
  case U8X8_MSG_DELAY_MILLI:
    delay__ms(arg_int);
    break;
  case U8X8_MSG_GPIO_DC:
    // DONE, Write to the GPIO_DC Pin
    if (arg_int == 0) {
      gpio__reset(dc);
    } else {
      gpio__set(dc);
    }
    break;
  case U8X8_MSG_GPIO_RESET:
    break;
  }
  return 1;
}

uint8_t u8x8_byte_4wire_hw_spi(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr) {
  uint8_t *data;
  switch (msg) {
  case U8X8_MSG_BYTE_SEND:
    data = (uint8_t *)arg_ptr;
    while (arg_int > 0) {
      ussp1__exchange_byte((uint8_t)*data);
      data++;
      arg_int--;
    }
    break;
  case U8X8_MSG_BYTE_INIT:
    break;
  case U8X8_MSG_BYTE_SET_DC:
    if (arg_int == 0) {
      gpio__reset(dc);
    } else {
      gpio__set(dc);
    }
    break;
  case U8X8_MSG_BYTE_START_TRANSFER:
    break;
  case U8X8_MSG_BYTE_END_TRANSFER:
    break;
  default:
    return 0;
  }
  return 1;
}

Android App

List Of Feature in the APP
Game Mode
MP3 Mode
List Of Songs in SD Card

Software Design

The Android app has been built using the cross platform framework Flutter

The app is composed of 3 parts, Game Mode, MP3 Mode and MP3 Song List. On the main screen we first connect to the bluetooth before establishing connection with any of the modes. The working of each mode is explained in each subsection below.

A few variables to note in advance ACK = 0x00, sent when successful NACK = 0xFF, sent incase there is any error

Game Mode

To enter the Game Mode screen we first check if the Bluetooth Connection is established. We send in a one byte data 0xa1 over bluetooth to the SJ2 Board and get back the response "a1$ack/nack$##"

We then enter the game mode which displays a joystick that can be oriented to a direction wherever the fruit appears on the LED matrix. The corresponding orientation value is then transmitted.

If the fruit had appeared in the First Quadrant (North-East), then 0x71 is sent from BLE app to sjtwo board. Likewise for Second Quadrant (North-West): 0x72, Third Quadrant (South-West): 0x73, Fourth Quadrant (South-East): 0x74.

MP3 Mode

To enter the MP3 Mode screen we first check if the Bluetooth Connection is established similar to the Game Mode. We send in one byte of data 0xa2 over bluetooth to the SJ2 Board and get back the response "a2$ack/nack$volumeInfo$currentSong$isPlaying/isPaused$##" where isPlaying is 1 and isPaused is 0.

These values are loaded into the MP3 Mode Screen as initial values for the current song playing.

We can then see a screen where we can control the various aspects of playing songs i.e Playing and Pausing the song, Go to next song and and Go to the previous song. We can also control the volume remotely.

Controlling each part of this interface is the same as sending a single byte of data over bluetooth to the SJ2 Board.

Playing and Pausing Song

We just toggle the state of the Song. We issue this command by sending 0xc1 which is the Toggle State command.

Next Song and Previous Song

Command for the previous song is 0xc0 Command for the next song is 0xc2

Control Volume remotely

For volume we divide the percentage 100 percent in 16 parts. We can send the value between 0xb0 to 0xbf in increments of one ste-p. This is parsed on the SJ2 Board and converted to an equivalent volume signal.

MP3 Song List

To get the list of MP3 Songs which are present in the SD card, we first check if the Bluetooth Connection is established similar to the Game Mode and MP3 Song mode. We send in one byte of data 0xa3 over bluetooth to the SJ2 Board and get back the response "a3$ack/nack$data$data$...$##". APIs that were designed to read song information and data by Audio Decoder, will be used for achieving this functionality.

Bluetooth Interface

The SJ-two is connected to the Bluetooth module through the Serial interface (UART3) and we have configured it at 38400 baud rate with 8-bit data and 1 stop bit using the Communication Mode. It is used to send and receive the Game and Music data from our entertainment device to an android application.

Hardware Design

Bluetooth Interface Pin Diagram

HC-05 Bluetooth module

HC-05 Bluetooth Module is used to set up wireless communication between the entertainment device and the Android phone. The right section of the Bluetooth Board has connection pins for power and signals as well as a 5V to 3.3V Regulator, LED, and level shifting.

HC-05 PinOut

* EN: N/A
* VCC: 5V Power 
* GND: Ground 
* TXD: Serial Transmit pin connected to RXD3 of SJ board
* RXD: Serial Receive  pin connected to TXD3 of SJ board 
* STATE: States if connected or not

Software Design

Bluetooth Software Design

Implementation

An accelerometer is used in the MP3 Mode to implement functionalities such as play, pause, switch to next and previous songs and volume control. In the game mode the “Fruit fury” game is played by smashing fruits appearing in the directions South East, South West, North East and North West. UART3 is used as communication protocol.


The Bluetooth commands that we are using to interact with Mobile app and Device are as follows:


 GAMING = 0xA1,
 NORTH_EAST = 0x71,
 NORTH_WEST = 0x72,
 SOUTH_WEST = 0x73,
 SOUTH_EAST = 0x74,
 MUSIC = 0xA2,
 SONG_LIST = 0xA3,
 NEXT_SONG = 0xC2,
 TOGGLE_SONG = 0xC1,
 PREV_SONG = 0xC0,
 ACK = 0x00,
 NACK = 0xFF,
 VOL_INC = 0xB1,
 VOL_DEC = 0xB0

Technical Challenges

1. RGB LED Matrix

a) Getting control of the matrix was challenging as it needs to follow specific sequence of pin enabling/disabling at appropriate timing.

b) Setting right delays to avoid flickers and get smooth transitioning between frames by using delays or for loops.

c) Fixing high CPU utilization by changing delay__us to vTaskDelay.

d) Designing elements of the game (title screen and fruit objects) which required careful plotting of pixel data.

2. Audio Decoder

a) The CPU utilization for sending a song task was very high (80% +).

  • In order to reduce the utilization, we gave the vTaskDelay(1) while waiting for the DREQ to be high. The high DREQ indicates that the decoder is ready to receive next 32 bytes of data. So meanwhile, when the DREQ pin is low, we made task to sleep for vTaskDelay(1). After doing this, we significantly reduced the CPU utilization to 15%. We tried with vTaskDelay(2) to get CPU utilization of 10%.
  • We further tried to make the CPU utilization below 10%. This was really a tough challenge, and figured out that the actual SPI clock is 1Mhz which is too slow as SPI is meant to operate at much higher speed. We changed the clock rate of SPI to 12MHz but the song speed was too slow. We checked the datasheet of the Mp3 decoder and set the internal clock multiplier to 4.5x. This make the shield operate at high clock rates at 12.XX Mhz. So keeping this in mind we made the SPI speed to 12MHz which is safe. We successfully achieved CPU utilization of 5-6% which is very much in the acceptable range.

Suggestions for Future Students

RGB LED Matrix

  • To begin with, focus on writing simple driver to get control of 1 pixel at a targeted location and then use appropriate loops to light up entire row / column.
  • Make sure all pixels are able to light up with all possible colors to eliminate hardware defects.
  • Try with minimum / no delays, print tick counts and then come up with meaningful delay numbers.
  • Optimize the code (minimum delays, avoiding repetitive function calls etc.) to bring down the CPU usage level.
  • Use the link in the references to draw desired elements and generate the matrix.

Conclusion

Conclude your project here. You can recap your testing and problems. You should address the "so what" part here to indicate what you ultimately learnt from this project. How has this project increased your knowledge?

Project Video

Upload a video of your project and post the link here.

Project Source Code

  • Git Project Link: [1]

References

Acknowledgement

We would like to thank professor Preet for giving us the opportunity to incorporate the course curriculum into practical model and supporting us whenever needed. Availability of slack channel and weekly reviews ensured us to clarify bottlenecks in the project, keep things organized and track progress of each tasks. We would also extend our gratitude towards ISA members who have taken their time in clearing our queries throughout the course.

References Used

Android GUI
RGB LED Matrix Interfacing and Designing
General/Miscellaneous