Difference between revisions of "S16: Robolamp"
Proj 146u3 (talk | contribs) (→Software Design) |
Proj 146u3 (talk | contribs) (→Software Design) |
||
Line 176: | Line 176: | ||
Show your software design. For example, if you are designing an MP3 Player, show the tasks that you are using, and what they are doing at a high level. Do not show the details of the code. For example, do not show exact code, but you may show psuedocode and fragments of code. Keep in mind that you are showing DESIGN of your software, not the inner workings of it. | Show your software design. For example, if you are designing an MP3 Player, show the tasks that you are using, and what they are doing at a high level. Do not show the details of the code. For example, do not show exact code, but you may show psuedocode and fragments of code. Keep in mind that you are showing DESIGN of your software, not the inner workings of it. | ||
− | + | ||
[[File:StateMachine.png|900px|thumb|centre|Figure 2. Software Design Flow]] | [[File:StateMachine.png|900px|thumb|centre|Figure 2. Software Design Flow]] |
Revision as of 03:49, 23 May 2016
Contents
Grading Criteria
- How well is Software & Hardware Design described?
- How well can this report be used to reproduce this project?
- Code Quality
- Overall Report Quality:
- Software Block Diagrams
- Hardware Block Diagrams
- Schematic Quality
- Quality of technical challenges and solutions adopted.
Robolamp: Autonomous Laptop Lamp
Abstract
Robolamp features an autonomous lamp that follows the movement of a user-defined object through OpenCV. For our project, we designated a specific mechanical pencil as our tracking object. Using two micro servo motors reflecting the 'x' and 'y' axis of rotation along with a uniquely designed lamp, Robolamp follows and tracks the user's writing movement while emitting a concentrated light on the surrounding area.
Objectives & Introduction
Show list of your objectives. This section includes the high level details of your project. You can write about the various sensors or peripherals you used to get your project completed.
- The lamp shall follow movement of the user-selected object (mechanical pencil)
- The lamp shall utilize two servo motors capable of interpreting pixel data from external program
- The external program shall be supported by OpenCV libraries
- The lamp shall contain an LED circuit driven by external power supply
- The lamp shall be user-created and 3D printed
Team Members & Responsibilities
- Brandon Zhen
- Write code for the motor movement based on CV data
- Transfer designs for lamp parts into 3D-printable models
- Dustin Phou
- Order parts
- Design circuit to externally power motor and LED
- James Ogden
- Create an OpenCV program that will track hand movement
- Design the components used to create the physical lamp
Schedule
Week# | Date | Task | Actual |
---|---|---|---|
1 | 4/4 | Obtain approval for the project, research and order necessary parts, make rough design of system | Approval obtained, research and design still in progress |
2 | 4/11 | Research software for designing the tracking system (OpenCV), write a simple program to track an object to test functionality and how data is generated | Built OpenCV and used a sample program to track a marker using the color of its cap |
3 | 4/18 | Write an OpenCV program to track the movement of a hand across a desk | The program is able to recognize an open palm and track it, but needs to be adjusted for the case of the hand writing |
4 | 4/25 | Test servo motors by connecting their pins to the SJOne board to determine how they can be controlled | Through testing found that the PWM duty cycles that correspond to -90° and +90° are 2.5% and 12.5%, respectively. Used this information to write a program to control the rotation of a motor based on coordinate data received from OpenCV. |
5 | 5/2 | Construct the lamp using a combination of motors and 3-D printed lamp components (base, stand, arm) | Design of base completed |
6 | 5/9 | Functionally verify lamp's movements and bugfix tracking algorithm | Design of arm completed, verified connectivity of components |
7 | 5/16 | Finalize project and demo | Thorough testing and debugging of servo smoothing and tracking. Project report and wiki-page completed. |
Parts List & Cost
Item # | Part # | Description | Amount | Total Cost |
---|---|---|---|---|
1 | SG92R | Micro Servo Motor | 4 | $23.80 |
2 | LD1117 | 3.3V 800mA Linear Voltage Regulator | 1 | $1.25 |
3 | Adafruit 977 | TO-220 Clip-On Heatsink | 1 | $0.75 |
4 | Adafruit 518 | 1 Watt Heatsink Mounted LED | 1 | $3.95 |
5 | 3-050504M | Aluminum SMT Heat Sink 0.5" x 0.5" | 1 | $2.75 |
6 | 3M 8810 | Heat Sink Thermal Tape 25mm x 25mm | 1 | $0.95 |
7 | n/a | 3D Printed Base | 1 | Free |
8 | n/a | 3D Printed Arm | 1 | Free |
9 | n/a | 3D Printed Head | 1 | Free |
10 | n/a | Webcam | 1 | Free |
Design & Implementation
The design section can go over your hardware and software design. Organize this section using sub-sections that go over your design and implementation.
Hardware Design
This project consists of a main lamp system that interfaces with the SJOne board and several other small subsystems.
The lamp is composed of a custom-made arm, base and head. Two servo motors connect the parts together: one connects the arm to the base and one connects the head to the arm. The arm is capable of rotating a full 180°, while the head was limited to rotating only 90°. The head houses a generic webcam inside of it that collects data for OpenCV to process. The head also has a 1 Watt LED mounted onto it to serve as the lamp's light source.
Because the motors draw a variable current that might exceed the current rating on the SJOne's pins, they were powered externally. The LED also shares this power circuit due to its large current draw. The basic voltage regulator circuit used to power them is shown below.
The LED on the head was also given a dedicated circuit in order to control its brightness based on the lighting conditions in the room. The circuit can be seen below.
Hardware Interface
In this section, you can describe how your hardware communicates, such as which BUSes used. You can discuss your driver implementation here, such that the Software Design section is isolated to talk about high level workings rather than inner working of your project.
Software Design
Show your software design. For example, if you are designing an MP3 Player, show the tasks that you are using, and what they are doing at a high level. Do not show the details of the code. For example, do not show exact code, but you may show psuedocode and fragments of code. Keep in mind that you are showing DESIGN of your software, not the inner workings of it.
Implementation
This section includes implementation, but again, not the details, just the high level. For example, you can list the steps it takes to communicate over a sensor, or the steps needed to write a page of memory onto SPI Flash. You can include sub-sections for each of your component implementation.
Testing & Technical Challenges
Describe the challenges of your project. What advise would you give yourself or someone else if your project can be started from scratch again? Make a smooth transition to testing section and described what it took to test your project.
Include sub-sections that list out a problem and solution, such as:
My Issue #1
Discuss the issue and resolution.
Conclusion
Conclude your project here. You can recap your testing and problems. You should address the "so what" part here to indicate what you ultimately learnt from this project. How has this project increased your knowledge?
Project Video
Upload a video of your project and post the link here.
Project Source Code
References
Acknowledgement
Any acknowledgement that you may wish to provide can be included here.
References Used
List any references used in project.
Appendix
You can list the references you used.