Difference between revisions of "S24: Team TerraByte"

From Embedded Systems Learning Academy
Jump to: navigation, search
(→‎Parts List & Cost)
(→‎Parts List & Cost)
Line 230: Line 230:
 
|-
 
|-
 
! scope="row"| 2
 
! scope="row"| 2
 +
| SJ2 boards
 +
| CMPE SCE
 +
| 4
 +
| $50.00 each
 +
|-
 +
! scope="row"| 3
 
| CAN Transceivers
 
| CAN Transceivers
 
| Adafruit [https://www.adafruit.com/product/5708]
 
| Adafruit [https://www.adafruit.com/product/5708]
 
| 4
 
| 4
 
| $3.95 each
 
| $3.95 each
−
|-
 
−
! scope="row"| 3
 
−
| SJ2 boards
 
−
| CMPE SCE
 
−
| 4
 
−
| $50.00 each
 
 
|-
 
|-
 
! scope="row"| 4
 
! scope="row"| 4

Revision as of 23:52, 12 March 2024

Title

TerraByte


Abstract

<2-3 sentence abstract>

Introduction

The project was divided into 5 modules:

  • Sensor Node
  • Motor Node
  • Driver Node
  • Geo Controller Node
  • Android App

Team Members & Responsibilities

<Team Picture>

Gitlab Project Link - C243_TerraByte

Module Owner Supporter
Sensor + Bridge Dikshant Kotla Hari
Motor + ESC Susmitha Ganesh Minal
Driver + LCD Minal Upadhye Hari
GPS + Geo Controller Harikrishnan Kokkanthara Jeevan Vamsi
App Vamsi Rushi Dhanekula Dikshant
  • Sensor
    • Link to Gitlab user1
  • Motor
    • Link to Gitlab user1
  • Geographical
    • Link to Gitlab user1
  • Communication Bridge Controller & LCD
    • Link to Gitlab user1
  • Android Application
    • Link to Gitlab user1
  • Testing Team
    • Link to Gitlab user1
  • Misc
    • master dbc - Minal
    • hardware - TBD


Schedule

Week# Start Date End Date Task Status
1 03/04/2024 03/10/2024
  • Read previous projects, gather information and discuss among the group members.
  • Order CAN transceiver modules.
 Completed
2 03/04/2024 03/10/2024
  • Understand and learn to use the Busmaster.
  • Build db9 connector and connect to Busmaster.
  • Distribute modules to each team member.
 Completed
3 03/11/2024 03/17/2024
  • Finalize and acquire sensors and RC car parts.
  • acquire LCD display
  • Create initial dbc
 Incomplete
4 03/18/2024 03/24/2024
  • Get Data from Ultrasonic Sensors
  • Get co-ordinates from GPS module
  • Get motors working
  • Display LCD module
  • Interface Compass(LSM303)
  • Interface Bluetooth
  • Explore plug-and-play mounting of sensors and SJ2 boards.
 Incomplete
5 03/25/2024 03/31/2024
  • Build on DBC and finalize message IDs
  • Develop GPS Module with Geo controller
  • Develop motor Module with motor Controller
  • Develop ultrasonic sensor module with sensor Controller
  • Develop LCD and driver module
 Incomplete
6 04/01/2024 04/07/2024

PROTOTYPE 1

  • Connect sensor-driver-motor modules
  • Assemble hardware
  • Basic setup integration tests
  • Basic mobile app setup
 Incomplete
7 04/08/2024 04/14/2024
  • Integrate Geo/GPS module with connected hardware
  • Motors with PID control
  • Obstacle avoidance
  • Finalize plug-and-play design
 Incomplete
8 04/15/2024 04/21/2024

PROTOTYPE 2

  • Start with the mobile app
  • Integrate Bluetooth module with app
  • Fine-tune obstacle avoidance
 Incomplete
9 04/22/2024 04/28/2024
  • Advanced integration testing
  • Indoor testing
 Incomplete
10 04/29/2024 05/05/2024

PROTOTYPE 3

  • Prepare for outdoor tests.
 Incomplete
11 05/06/2024 05/12/2024

PROTOTYPE 4

  • Perform outdoor tests and recalibrate.
 Incomplete
12 05/13/2024 05/19/2024
  • Final Demo
 Incomplete
13 05/20/2024 05/26/2024
  • TBD
 Incomplete


Parts List & Cost

Item# Part Desciption Vendor Qty Cost
1 Rustler XL-5 Stadium Truck / Slash 2Wd Short Course Racing Truck Traxxas 1 $250.00
2 SJ2 boards CMPE SCE 4 $50.00 each
3 CAN Transceivers Adafruit [1] 4 $3.95 each
4 LCD module 20*4 GeekPi [2] 1 $0.00
5 Bluetooth Adafruit [3] 1 $0.00
6 Ultrasonic Sensors Adafruit [4] 4 $0.00
7 GPS module Adafruit [5] 1 $0.00
8 Compass Adafruit [6] 1 $0.00
9 GPS Antenna  ? 1 $0.00
10 RPM Sensors  ? 1 $0.00
xx DB9 connector female Amazon [7] 1 $9.99
xx Jumper wires Amazon [8] 2 $6.98 each
xx Bread boards Amazon [] 2 $0.00 each


Printed Circuit Board

<Picture and information, including links to your PCB>


CAN Communication

<Talk about your message IDs or communication strategy, such as periodic transmission, MIA management etc.>

Hardware Design

<Show your CAN bus hardware design>

DBC File

<Gitlab link to your DBC file> <You can optionally use an inline image>



Sensor ECU

<Picture and link to Gitlab>

Hardware Design

Software Design

<List the code modules that are being called periodically.>

Technical Challenges

< List of problems and their detailed resolutions>


Motor ECU

<Picture and link to Gitlab>

Hardware Design

Software Design

<List the code modules that are being called periodically.>

Technical Challenges

< List of problems and their detailed resolutions>


Geographical Controller

<Picture and link to Gitlab>

Hardware Design

Software Design

<List the code modules that are being called periodically.>

Technical Challenges

< List of problems and their detailed resolutions>



Communication Bridge Controller & LCD

<Picture and link to Gitlab>

Hardware Design

Software Design

<List the code modules that are being called periodically.>

Technical Challenges

< List of problems and their detailed resolutions>


Master Module

<Picture and link to Gitlab>

Hardware Design

Software Design

<List the code modules that are being called periodically.>

Technical Challenges

< List of problems and their detailed resolutions>


Mobile Application

<Picture and link to Gitlab>

Hardware Design

Software Design

<List the code modules that are being called periodically.>

Technical Challenges

< List of problems and their detailed resolutions>




Conclusion

<Organized summary of the project>

<What did you learn?>

Project Video

Project Source Code

Advise for Future Students

<Bullet points and discussion>

Acknowledgement

=== References ===

Retrieved from "http://socialledge.com/sjsu/index.php?title=S24:_Team_TerraByte&oldid=71216"