Difference between revisions of "F16: Micro Watch Monitoring System"
146 user11 (talk | contribs) (→Schedule) |
146 user11 (talk | contribs) (→Abstract) |
||
Line 2: | Line 2: | ||
== Abstract == | == Abstract == | ||
− | The Micro Watch Monitoring System uses Amazon's Alexa Voice Service to relay monitored data from a network of SJ-One Boards with the assistance of the Raspberry Pi 3. The monitored data from a SJ-One Board is transmitted and received via a Xbee Wire Antenna module. The monitored data is then uploaded to our backend system, Google Firebase, by the Raspberry Pi 3 and is accessible through any device integrated with the Alexa Voice Service. | + | The Micro Watch Monitoring System uses Amazon's Alexa Voice Service to relay monitored data from a network of SJ-One Boards with the assistance of the Raspberry Pi 3. The monitored data from a SJ-One Board is transmitted and received via a Xbee Wire Antenna module. The monitored data is then uploaded to our backend system, Google Firebase, by the Raspberry Pi 3, and is accessible through any device integrated with the Alexa Voice Service. |
== Objectives & Introduction == | == Objectives & Introduction == |
Revision as of 06:58, 20 December 2016
Contents
Micro Watch Monitoring System
Abstract
The Micro Watch Monitoring System uses Amazon's Alexa Voice Service to relay monitored data from a network of SJ-One Boards with the assistance of the Raspberry Pi 3. The monitored data from a SJ-One Board is transmitted and received via a Xbee Wire Antenna module. The monitored data is then uploaded to our backend system, Google Firebase, by the Raspberry Pi 3, and is accessible through any device integrated with the Alexa Voice Service.
Objectives & Introduction
The objective of this project is to be able to monitor a network of SJ-One Boards for statistical data that is accessible via voice commands acknowledged by the Alexa Voice Service.
Tasks
- Create a driver that monitors statistical data on the SJ-One Board
- Create a driver that utilizes the Xbee Wire Antenna to wirelessly transmit data via the UART protocol
- Create a driver that parses data received by the Xbee Wire Antenna and relays it to Firebase
- Create a set of Alexa Skills that can access the data on Firebase via voice commands
Team Members & Responsibilities
- SJ-One Board Firmware Design
- Hardware Connectivity Design
- Firmware and Hardware System Testing
- Raspberry Pi 3 Firmware Design
- Amazon Alexa Voice Service Skill Design
- Firmware and Voice Service System Testing
Schedule
Week | Begin Task | Task Description | Result | Planned Completion | Actual Completion |
---|---|---|---|---|---|
1 | |
|
|
|
|
2 | |
|
|
|
|
3 | |
|
|
|
|
4 | |
|
|
|
|
5 | |
|
|
|
|
6 | |
|
|
|
|
7 | |
|
|
|
|
8 | |
|
|
|
|
9 | |
|
|
|
|
10 | |
|
|
|
|
Parts List & Cost
Give a simple list of the cost of your project broken down by components. Do not write long stories here.
Design & Implementation
The design section can go over your hardware and software design. Organize this section using sub-sections that go over your design and implementation.
Hardware Design
Discuss your hardware design here. Show detailed schematics, and the interface here.
Hardware Interface
In this section, you can describe how your hardware communicates, such as which BUSes used. You can discuss your driver implementation here, such that the Software Design section is isolated to talk about high level workings rather than inner working of your project.
Software Design
Show your software design. For example, if you are designing an MP3 Player, show the tasks that you are using, and what they are doing at a high level. Do not show the details of the code. For example, do not show exact code, but you may show psuedocode and fragments of code. Keep in mind that you are showing DESIGN of your software, not the inner workings of it.
Implementation
This section includes implementation, but again, not the details, just the high level. For example, you can list the steps it takes to communicate over a sensor, or the steps needed to write a page of memory onto SPI Flash. You can include sub-sections for each of your component implementation.
Testing & Technical Challenges
Describe the challenges of your project. What advise would you give yourself or someone else if your project can be started from scratch again? Make a smooth transition to testing section and described what it took to test your project.
Include sub-sections that list out a problem and solution, such as:
My Issue #1
Discuss the issue and resolution.
Conclusion
Conclude your project here. You can recap your testing and problems. You should address the "so what" part here to indicate what you ultimately learnt from this project. How has this project increased your knowledge?
Project Video
Upload a video of your project and post the link here.
Project Source Code
References
Acknowledgement
Any acknowledgement that you may wish to provide can be included here.
References Used
List any references used in project.
Appendix
You can list the references you used.