Difference between revisions of "S19: CANT Bus"
Proj user4 (talk | contribs) (→DBC File) |
Proj user4 (talk | contribs) (→CAN Communication) |
||
Line 263: | Line 263: | ||
BO_ 200 AVOIDANCE_LIDAR: 8 AVOIDANCE | BO_ 200 AVOIDANCE_LIDAR: 8 AVOIDANCE | ||
− | SG_ | + | SG_ LIDAR_f_right : 0|8@1+ (1,0) [0|0] "cm" DRIVER |
− | SG_ | + | SG_ LIDAR_f_middle : 8|8@1+ (1,0) [0|0] "cm" DRIVER |
− | SG_ | + | SG_ LIDAR_f_left : 16|8@1+ (1,0) [0|0] "cm" DRIVER |
− | SG_ | + | SG_ LIDAR_b_right : 24|8@1+ (1,0) [0|0] "cm" DRIVER |
− | SG_ | + | SG_ LIDAR_b_middle : 32|8@1+ (1,0) [0|0] "cm" DRIVER |
− | SG_ | + | SG_ LIDAR_b_left : 40|8@1+ (1,0) [0|0] "cm" DRIVER |
BO_ 300 LOCALIZE_GPS: 8 LOCALIZE | BO_ 300 LOCALIZE_GPS: 8 LOCALIZE |
Revision as of 06:02, 11 April 2019
Contents
Grading Criteria
- How well is Software & Hardware Design described?
- How well can this report be used to reproduce this project?
- Code Quality
- Overall Report Quality:
- Software Block Diagrams
- Hardware Block Diagrams
- Schematic Quality
- Quality of technical challenges and solutions adopted.
Project Title
[C]ompile [A]nother [N]on-[T]rivial Bus
Abstract
<2-3 sentence abstract>
Introduction
The project was divided into N modules:
- Sensor ...
- Motor..
- ...
- Android
Team Members & Responsibilities
- Kevin Chan
- Lidar, Tachometer, Power, Wireless communications
- Khrysta Finch
- Assistant Team Leader, Chassis, Telemetry, Compass, Driver (PCB/Schematic)
- Andrew Javier
- Motor, Steering, Compass, Wireless communications (GPS, Lidar, Chasis)
- Aaron Lee
- GPS, Mobile App (Compass, Telemetry)
- Jonathan Rojas
- GPS, Lidar, Tachometer, Power
- Vijay Vanapalli
- Motor, Steering, PCB/Schematic (Mobile App)
- Nelson Wong
- Team Leader, Driver, Telemetry, PCB/Schematic, Chassis, Mobile App
<Team Picture>
Gitlab Project Link - [1]
<Provide ECU names and members responsible> <One member may participate in more than one ECU>
- Sensor
- Link to Gitlab user1
- Link to Gitlab user2
- Motor
- Link to Gitlab user1
- Link to Gitlab user2
- Geographical
- Link to Gitlab user1
- Link to Gitlab user2
- Communication Bridge Controller & LCD
- Link to Gitlab user1
- Link to Gitlab user2
- Android Application
- Link to Gitlab user1
- Link to Gitlab user2
- Testing Team
- Link to Gitlab user1
- Link to Gitlab user2
Schedule
Show a simple table or figures that show your scheduled as planned before you started working on the project. Then in another table column, write down the actual schedule so that readers can see the planned vs. actual goals. The point of the schedule is for readers to assess how to pace themselves if they are doing a similar project.
Week# | Start Date | End Date | Task Description | Status | Completion Date |
---|---|---|---|---|---|
1 | 3/4 | 3/10 |
|
Complete | |
2 | 3/11 | 3/17 |
|
||
3 | 3/18 | 3/24 |
|
||
4 | 3/25 | 3/31 |
|
||
5 | 4/1 | 4/7 |
|
||
6 | 4/8 | 4/14 |
|
||
7 | 4/15 | 4/21 |
|
||
8 | 4/22 | 4/28 |
|
||
9 | 4/29 | 5/5 |
|
||
10 | 5/6 | 5/12 |
|
Parts List & Cost
Item# | Part Desciption | Vendor | Qty | Cost |
---|---|---|---|---|
1 | RC Car | Traxxas | 1 | $250.00 |
2 | CAN Transceivers MCP2551-I/P | Microchip [2] | 8 | Free Samples |
Printed Circuit Board
<Picture and information, including links to your PCB>
CAN Communication
<Talk about your message IDs or communication strategy, such as periodic transmission, MIA management etc.>
Hardware Design
<Show your CAN bus hardware design>
CAN Communication
243.dbc
VERSION "1.0"
NS_ :
BA_
BA_DEF_
BA_DEF_DEF_
BA_DEF_DEF_REL_
BA_DEF_REL_
BA_DEF_SGTYPE_
BA_REL_
BA_SGTYPE_
BO_TX_BU_
BU_BO_REL_
BU_EV_REL_
BU_SG_REL_
CAT_
CAT_DEF_
CM_
ENVVAR_DATA_
EV_DATA_
FILTER
NS_DESC_
SGTYPE_
SGTYPE_VAL_
SG_MUL_VAL_
SIGTYPE_VALTYPE_
SIG_GROUP_
SIG_TYPE_REF_
SIG_VALTYPE_
VAL_
VAL_TABLE_
BS_:
BU_: COMMS DRIVER LOCALIZE MOTOR AVOIDANCE
BO_ 10 KILL_MOTOR: 1 DRIVER
SG_ KILL_MOTOR_cmd : 0|8@1+ (1,0) [0|0] "" MOTOR,COMMS
BO_ 11 KILL_MOTOR_REMOTE: 1 COMMS
SG_ KILL_MOTOR_cmd : 0|8@1+ (1,0) [0|0] "" DRIVER
BO_ 100 DRIVER_HEARTBEAT: 1 DRIVER
SG_ DRIVER_HEARTBEAT_cmd : 0|8@1+ (1,0) [0|0] "" LOCALIZE,COMMS,AVOIDANCE,MOTOR
BO_ 101 MOTOR_CMD: 2 DRIVER
SG_ MOTOR_CMD_steer : 0|6@1+ (1,-30) [-30|30] "degrees" MOTOR
SG_ MOTOR_CMD_drive : 8|7@1+ (1,0) [0|100] "" MOTOR
BO_ 200 AVOIDANCE_LIDAR: 8 AVOIDANCE
SG_ LIDAR_f_right : 0|8@1+ (1,0) [0|0] "cm" DRIVER
SG_ LIDAR_f_middle : 8|8@1+ (1,0) [0|0] "cm" DRIVER
SG_ LIDAR_f_left : 16|8@1+ (1,0) [0|0] "cm" DRIVER
SG_ LIDAR_b_right : 24|8@1+ (1,0) [0|0] "cm" DRIVER
SG_ LIDAR_b_middle : 32|8@1+ (1,0) [0|0] "cm" DRIVER
SG_ LIDAR_b_left : 40|8@1+ (1,0) [0|0] "cm" DRIVER
BO_ 300 LOCALIZE_GPS: 8 LOCALIZE
SG_ GPS_STATUS : 0|8@1+ (1,0) [0|0] "" DRIVER,COMMS
SG_ GPS_TX_LATITUDE : 8|24@1+ (0.000001,37.000000) [37.000000|38.000000] "degrees" DRIVER,COMMS
SG_ GPS_TX_LONGITUDE : 32|24@1- (0.000001,-122.000000) [-122.000000|-121.000000] "degrees" DRIVER,COMMS
BO_ 301 LOCALIZE_IMU: 8 LOCALIZE
SG_ IMU_STATUS : 0|8@1+ (1,0) [0|0] "" DRIVER,COMMS
SG_ IMU_COMPASS : 8|12@1+ (0.1,0) [0|360.0] "degrees" DRIVER,COMMS
BO_ 302 SPEED: 8 LOCALIZE
SG_ SPEED_kph : 0|16@1- (0.001,0) [-5|10] "kph" COMMS,DRIVER
BO_ 400 MOTOR_STATUS: 1 MOTOR
SG_ MOTOR_STATUS_data : 0|8@1+ (1,0) [0|0] "" COMMS,DRIVER
BO_ 500 SET_WAYPOINT: 8 COMMS
SG_ SET_WAYPOINT_LAT : 0|24@1+ (0.000001,37.000000) [37.000000|38.000000] "degrees" DRIVER
SG_ SET_WAYPOINT_LONG : 24|24@1- (0.000001,-122.000000) [-122.000000|-121.000000] "degrees" DRIVER
BO_ 501 SET_STATUS: 1 COMMS
SG_ SET_STATUS_cmd : 0|8@1+ (1,0) [0|0] "" DRIVER
CM_ BU_ DRIVER "The driver controller driving the car";
CM_ BU_ MOTOR "The motor controller of the car";
CM_ BU_ LOCALIZE "The localization controller of the car";
CM_ BU_ AVOIDANCE "The collision avoidance controller of the car";
CM_ BU_ COMMS "The wireless comms and telemetry controller of the car";
CM_ BO_ 100 "Sync message used to synchronize the controllers";
CM_ BO_ 501 "0: stop, 1: ready, 2: navigate, 3: skip/next"
BA_DEF_ "BusType" STRING ;
BA_DEF_ BO_ "GenMsgCycleTime" INT 0 0;
BA_DEF_ SG_ "FieldType" STRING ;
BA_DEF_DEF_ "BusType" "CAN";
BA_DEF_DEF_ "FieldType" "";
BA_DEF_DEF_ "GenMsgCycleTime" 0;
BA_ "GenMsgCycleTime" BO_ 500 100;
BA_ "GenMsgCycleTime" BO_ 100 1000;
BA_ "GenMsgCycleTime" BO_ 101 100;
BA_ "GenMsgCycleTime" BO_ 400 100;
BA_ "GenMsgCycleTime" BO_ 200 100;
BA_ "FieldType" SG_ 500 DBC_TEST1_enum "DBC_TEST1_enum";
BA_ "FieldType" SG_ 100 DRIVER_HEARTBEAT_cmd "DRIVER_HEARTBEAT_cmd";
VAL_ 500 DBC_TEST1_enum 2 "DBC_TEST1_enum_val_two" 1 "DBC_TEST1_enum_val_one" ;
VAL_ 100 DRIVER_HEARTBEAT_cmd 2 "DRIVER_HEARTBEAT_cmd_REBOOT" 1 "DRIVER_HEARTBEAT_cmd_SYNC" 0 "DRIVER_HEARTBEAT_cmd_NOOP" ;
Sensor ECU
<Picture and link to Gitlab>
Hardware Design
Software Design
<List the code modules that are being called periodically.>
Technical Challenges
<Bullet or Headings of a module>
Unreliable sonor sensors
<Problem Summary> <Problem Resolution>
Motor ECU
<Picture and link to Gitlab>
Hardware Design
Software Design
<List the code modules that are being called periodically.>
Technical Challenges
<Bullet or Headings of a module>
Unreliable Servo Motors
<Problem Summary> <Problem Resolution>
Geographical Controller
<Picture and link to Gitlab>
Hardware Design
Software Design
<List the code modules that are being called periodically.>
Technical Challenges
<Bullet or Headings of a module>
Unreliable GPS lock
<Problem Summary> <Problem Resolution>
Communication Bridge Controller & LCD
<Picture and link to Gitlab>
Hardware Design
Software Design
<List the code modules that are being called periodically.>
Technical Challenges
<Bullet or Headings of a module>
Insane Bug
<Problem Summary> <Problem Resolution>
Master Module
<Picture and link to Gitlab>
Hardware Design
Software Design
<List the code modules that are being called periodically.>
Technical Challenges
<Bullet or Headings of a module>
Improper Unit Testing
<Problem Summary> <Problem Resolution>
Mobile Application
<Picture and link to Gitlab>
Hardware Design
Software Design
<List the code modules that are being called periodically.>
Technical Challenges
<Bullet or Headings of a module>
Wifi Link Reliability
<Problem Summary> <Problem Resolution>
Conclusion
<Organized summary of the project>
<What did you learn?>
Project Video
Project Source Code
Advise for Future Students
<Bullet points and discussion>