- 2012 SJ One Board
- 2012 SJ One Hello World Sample Project
- 2012 SJ One FreeRTOS Tutorial
- Generate Documentation from Sample Projects
- Eclipse : New Project & Tricks
- Windows Virtual Machine
LPC17xx (SJ One Board) Advanced Topics :
Hyperload LPC Bootloader :
Get Development Package
- This article shows you how to write software for SJ One Board. The first step to getting started with the Development Package is to get the package itself!
- Get the Development Package and unzip in your C drive
- It is important to NOT unzip at your desktop
- The unzipped path should not have spaces
- Follow the steps below; screenshots of reference images are included.
- You can also watch a Video Demonstration
Step by Step Tutorial
Here are steps to follow in order to compile program for Embedded Processors:
1. Plug-in your development board
2. Once Board driver is installed, open up Eclipse32_Emb.bat file
3. Once Eclipse opens, open ONLY ONE project. Close other projects if they are open.
4. Press Ctrl+B to build your project
Now it is time to load the compiled program to the Embedded Board
8. Open up Hercules from your Development Package
Troubleshooting & Hints
- Clicking on Set in Hyperload CPU Frequency section will make more choices appear under COM Port speed.
- You can program at any of the baud rates listed
- Note that you can only open up COM Port in ONE Program
- If you are programming, close COM Port in Hercules and open in Hyperload
- If you wish to look at the output, close COM Port in Hyperload and open in Hercules
- Hyperload will always grab the latest HEX file before programming
- Only change HEX file if you are working on another project.