Difference between revisions of "F14: Collision Avoidance Car"

From Embedded Systems Learning Academy
Jump to: navigation, search
(Abstract)
(Objective & Scope)
Line 6: Line 6:
  
 
==Objective & Scope==
 
==Objective & Scope==
The objective this project was to use a Lidar (laser-based device for measuring distance) to find obstacles around a moving toy car. Using this information, the car will change direction and prevent collisions. The car has two modes of operation: manual and automatic. In the automatic mode, the car moves around autonomously while avoiding obstacles to the sides, in the front, and in the back either by stopping, steering or going forward or backward. In the manual mode, the car's movements can be controlled through a Bluetooth connection and a forward collision braking will prevent it from hitting obstacles.
+
The project objective was to implement Lidar(laser-based device for measuring distance) technology, coupled with a toy car, to autonomously detect and avoid obstacles. The car operates in two modes: automatic and manual. In the automatic mode, the car maneuvers around autonomously, avoiding obstacles to the front, rear, and sides. Whenever an obstacle is detected, the car maneuvers in the opposite direction, as long as that direction is also free of obstacles. In the manual mode, the car's movements are controlled via a Bluetooth connection. In addition to direction controls, a user is able to adjust the speed of the car and to adjust the distance at which obstacles are avoided.
  
 
==Team Members & Roles==
 
==Team Members & Roles==

Revision as of 18:32, 21 December 2014

Collision Avoidance Car

PICTURE HERE

Abstract

The inspiration behind the Collision Avoidance Car project comes from the state-of-the-art field of self-driving cars. All major automotive companies are investing heavily in autonomous car technology. One of the more prominent autonomous cars being developed is the Google Car, which features Lidar and photo-imaging technology to implement autonomy. The goal of the self-driving car is to reduce gridlock, eliminate traffic fatalities, and most importantly, to eliminate the monotony of driving. This project will explore the fundamentals of Lidar, and how this technology is being used for cutting-edge products, such as the Google Car.

Objective & Scope

The project objective was to implement Lidar(laser-based device for measuring distance) technology, coupled with a toy car, to autonomously detect and avoid obstacles. The car operates in two modes: automatic and manual. In the automatic mode, the car maneuvers around autonomously, avoiding obstacles to the front, rear, and sides. Whenever an obstacle is detected, the car maneuvers in the opposite direction, as long as that direction is also free of obstacles. In the manual mode, the car's movements are controlled via a Bluetooth connection. In addition to direction controls, a user is able to adjust the speed of the car and to adjust the distance at which obstacles are avoided.

Team Members & Roles

Introduction

Parts & Cost

Design Implementation

CMPE146 F14 LidarGroup SoftwareStateMachine2.png

System Integration

Verification

Technical Challenges

Future Enhancements

Conclusion

References