Difference between revisions of "S17: ElectricBoard"
Proj user15 (talk | contribs) (→Team Members & Responsibilities) |
Proj user15 (talk | contribs) (→Abstract) |
||
| Line 14: | Line 14: | ||
== Abstract == | == Abstract == | ||
| − | + | Transportation is a necessary part of everyday life, and it can be a stressful, time-consuming task. People are often looking for faster, cleaner, inexpensive, and more convenient modes for transportation. Considering the amount of traffic in urban areas such as San Jose, regular vehicles are not as convenient or quicker than other methods such as bikes or skateboards. However, cities like SJ are quite large college cities, so human-powered modes make it potentially tiring. Therefore, this project hopes to enhance these modes by creating electronic versions. | |
| − | The goal of this project is to design an electric skateboard which can be controlled via a wireless remote. | + | The goal of this project is to design an electric skateboard which can be controlled via a wireless remote. Two SJOne Boards with FreeRTOS will be used as microcontrollers to control both the remote control and skateboard, respectively. |
== Objectives & Introduction == | == Objectives & Introduction == | ||
Revision as of 02:01, 18 May 2017
Contents
Grading Criteria
- How well is Software & Hardware Design described?
- How well can this report be used to reproduce this project?
- Code Quality
- Overall Report Quality:
- Software Block Diagrams
- Hardware Block Diagrams
- Schematic Quality
- Quality of technical challenges and solutions adopted.
ElectricBoard
Abstract
Transportation is a necessary part of everyday life, and it can be a stressful, time-consuming task. People are often looking for faster, cleaner, inexpensive, and more convenient modes for transportation. Considering the amount of traffic in urban areas such as San Jose, regular vehicles are not as convenient or quicker than other methods such as bikes or skateboards. However, cities like SJ are quite large college cities, so human-powered modes make it potentially tiring. Therefore, this project hopes to enhance these modes by creating electronic versions.
The goal of this project is to design an electric skateboard which can be controlled via a wireless remote. Two SJOne Boards with FreeRTOS will be used as microcontrollers to control both the remote control and skateboard, respectively.
Objectives & Introduction
The main objective of this project is to develop a user-controlled electric skateboard. In order to do so, the following will need to be done:
- Design of electric skateboard system
- Appropriate motor controls and interfacing with Electronic Speed Controllers (ESC)
- Design of remote control system
- Button and analog linear slider inputs to determine motor powers
- LCD screen to display electric skateboard data
- Establish wireless communication between electric skateboard and remote control systems
Team Members & Responsibilities
- Andrew Vo
- Elton Leung
- Eric Panganiban
- Money Bag
- James Grantham
- Saketh Sai Narayana
Schedule
| Week# | Date | Task | Status | Details | Actual Date Complete |
|---|---|---|---|---|---|
| 0 | 03/14 | Finalize Project Proposals | Completed | Project Proposal Finalized. | 03/14/2017 |
| 1 | 03/21 | Finalize Bill of Materials/Design Schematic | Completed | BoM finalized. Design schematic completed. | 03/25/2017 |
| 2 | 03/28 | Order Parts/Components | Completed | Kit ordered 3/22. LiPo and Charger ordered 3/30. Personal longboard to be used. | 03/30/2017 |
| 3 | 04/04 | PCB Design/Order | Completed | PCB designed 04/07. PCB received 5/11. | 05/11/2017 |
| 4 | 04/11 | Assembly of Components | Completed | Will not be using housing. All parts mounted by velcro tape. | 05/10/2017 |
| 5 | 04/18 | Motor Control Implementation | Completed | Use PWM pin 2.0 on board. | 04/20/2017 |
| 6 | 04/25 | Remote Control Implementation | Completed | Using pin 2.6 for button and pin 0.26 for analog slider. Screen to be implemented later. | 04/25/17 |
| 7 | 05/02 | Testing/Debug/Troubleshoot | Completed | Need to improve wireless communication range. Max motor velocity causes instability. | 05/08/2017 |
| 8 | 05/09 | Fine Tune | |||
| 9 | 05/16 | Prepare for Demo/Complete Report | In Progress | Report began 05/13 | |
| 10 | 05/23 | Project Demo |
Parts List & Cost
| Part Name | Cost | Qty | Comments |
|---|---|---|---|
| SJOne Board | $80.00 | 2 | Microcontrollers used for communicating b/w remote control/skateboard |
| Nucbot Motor Kit | $369.00 | 1 | Includes Motors, wheels, and ESC |
| LiPo Batteries | $43.00 | 1 | Rechargeable battery to power ESC/motors |
| LiPo Balancer/Charger | $62.99 | 1 | Charge LiPo batteries |
| PCB order | ??? | 1 | Battery charing for Remote Control |
| Skateboard | $100.00 | 1 | Used longboard used. |
| Velcro mounting | $8.99 | 1 | Mounting components onto bottom of longboard |
| Button | $1.99 | 1 | Press to send motor driving percentage. |
| Analog Slider | $1.99 | 1 | Slide to adjust power to drive motors. |
| LED Screen | ??? | 1 | UI display for remote control |
Design & Implementation
The design section can go over your hardware and software design. Organize this section using sub-sections that go over your design and implementation.
Hardware Design
Discuss your hardware design here. Show detailed schematics, and the interface here.
Electric Skateboard
Remote Control
Hardware Interface
In this section, you can describe how your hardware communicates, such as which BUSes used. You can discuss your driver implementation here, such that the Software Design section is isolated to talk about high level workings rather than inner working of your project.
Electric Skateboard
Remote Control
Software Design
Show your software design. For example, if you are designing an MP3 Player, show the tasks that you are using, and what they are doing at a high level. Do not show the details of the code. For example, do not show exact code, but you may show psuedocode and fragments of code. Keep in mind that you are showing DESIGN of your software, not the inner workings of it.
Implementation
This section includes implementation, but again, not the details, just the high level. For example, you can list the steps it takes to communicate over a sensor, or the steps needed to write a page of memory onto SPI Flash. You can include sub-sections for each of your component implementation.
Testing & Technical Challenges
Describe the challenges of your project. What advise would you give yourself or someone else if your project can be started from scratch again? Make a smooth transition to testing section and described what it took to test your project.
Include sub-sections that list out a problem and solution, such as:
Hardware Mounting
Most electric skateboards have a housing which encases the LiPo battery, ESCs, and receiver that are necessary to be mounted onto the board. However, all commercially available housings for skateboards were too small for the components ordered. This is mainly due to the size of the LiPo battery. The LiPo battery being used for this project is not one typically used for electric skateboards. It is very thick compared to the ones that are used for electric skateboards. Velcro mounting tape will be used instead of the housing enclosure for this project because it has a strong enough hold and can easily be removed without damaging the equipment. This is only being used as a temporary solution until a thinner LiPo battery can replace the existing one and an appropriate housing enclosure can be ordered.
Electronic Speed Controllers
The electronic speed controllers (ESC) were ordered as part of a kit. However, no specification sheet or documentation came with the ESC's. ESC's usually receive and interpret an input PWM signal to drive motors at a specified speed. The duty cycle of the PWM signal required by the ESC's to drive the motor was unknown. We requested a data sheet for the ESC's from the company that we ordered from but there was no response.
An existing wireless receiver and remote came with the kit as well, but, for this project, we wanted to design and implement our own remote control. The output of the wireless receiver was observed with an oscilloscope after connecting these two components to the board. From the oscilloscope readings, proper PWM signals were determined for an idle state, maximum velocity state, and maximum reverse velocity state for the ESC's.
Wireless Communication Range
The electric skateboard and wireless communication were initially working. However, with further testing, it was found that the wireless communication was unstable for the nordic wireless chip on the SJ One board for distances over approximately 3 feet. The data transfer rate was lowered to 250 kB/s from 2000 kB/s which increased the wireless communication distance to about 4 feet. However, we wanted a much more stable connection so antennas were added.
Conclusion
Conclude your project here. You can recap your testing and problems. You should address the "so what" part here to indicate what you ultimately learnt from this project. How has this project increased your knowledge?
Project Video
Upload a video of your project and post the link here.
Project Source Code
References
Acknowledgement
Any acknowledgement that you may wish to provide can be included here.
References Used
List any references used in project.
Appendix
You can list the references you used.
