Difference between revisions of "S23: CAN CLAN"

From Embedded Systems Learning Academy
Jump to: navigation, search
(Communication Bridge Controller & LCD)
(Printed Circuit Board)
Line 381: Line 381:
 
This is the picture shows protoboard.
 
This is the picture shows protoboard.
  
[[File:Printed_Circuit_Board1.jpg|500px|Image: 250 pixels]]
+
[[File:Printed_Circuit_Board1.jpg|500px|Image: 250 pixels]][[File:Printed_Circuit_Board2.jpg|500px|Image: 250 pixels]]
  
 
<HR>
 
<HR>

Revision as of 00:05, 14 May 2023

CAN CLAN

RC Car1.jpg

Picture of the RC Car


Abstract

Our goal for this project is to use knowledge we gathered from lectures to design, implement, and test a self-driving RC car using a Controller Area Network (CAN) bus for controller communication. The project involves FreeRTOS and utilizes periodic tasks (running at 1Hz, 10Hz, and 100Hz) to gather, process, and display data from various embedded modules.


Introduction

The project was divided into 5 modules:

  • Sensor Information
  • Motor Operation
  • Geological Information
  • Driver & LCD Manager
  • Bridge & Android Application


Team Members & Responsibilities

<Team Picture>

  • Final car.png

Gitlab Project Link - https://gitlab.com/rashmi_sv/the_CAN_clan.git

  • Final car.png
  • Rashmi Suhas Vaidya

    • Geo Controller
    • GPS and Compass Interfacing
    • Driver Node
    • Integration Testing
  • Final car.png
  • Zeel Jatinkumar Lia

    • Sensor and Bridge Controller
    • RPM Sensor
    • Driver Node
    • Integration Testing
  • Final car.png
  • Priyam Hajisheth

    • Driver Node
    • LCD interfacing
    • Mobile App
    • Integration Testing
  • Final car.png
  • Xinyu He

    • Hardware solution
    • Wiki Page Update
    • Integration Testing
  • Final car.png
  • Hongjin Cheng

    • RPM Sensor
    • Motor Controller
    • Hardware assembling
    • Integration Testing




    Schedule

    Week# Start Date End Date Task Status
    1 03/01/2023 03/07/2023
    • Read previous projects, gather information and discuss among the group members.
    • Discuss each team-member's preference and assign controller roles
    • Create parts list for the RC car, discuss, and decide on each item
    • Completed
    2 03/08/2023 03/14/2023
    • Order all parts from list and save tracking/price info
    • Completed
    3 03/15/2023 03/21/2023
    • Design interface for Bridge and Sensor Controller, with unit tests
    • Design interface for Motor Controller, with unit tests
    • Design interface for Driver and LCD Controller, with unit tests
    • Integrate Bridge/Sensor Controller to CAN bus with DBC, handling messages
    • Integrate Motor Controller to CAN bus with DBC, handling messages
    • Integrate Driver Controller to CAN bus with DBC, handling messages
    • All parts received


    • Completed
    4 03/22/2023 03/28/2023
    • Design interface for GEO Controller, with unit tests
    • Integrate Geological Controller to CAN bus with DBC, handling messages
    • Integrate Ultrasonic sensor with SJ2 to verify distance from obstacle is sensed
    • Integrate Motor and Steering with PWM control, figure out the working ranges
    • Integrate GPS sensor with SJ2, get GPGGA strings over UART, parse current coordinates
    • Completed
    5 03/29/2023 04/04/2023
    • Integrate Compass sensor with SJ2 board over I2C and get bearing values
    • Connect all nodes together on the CAN bus, verify messages across all nodes
    • Code the Haversine formula into GEO controller to get distance and heading based on current and destination coordinates
    • Write driver logic based on distance and heading from GEO and obstacle details from sensor nodes
    • Integrate GPS and Compass peripherals, writing the driver and unit tests
    • MILESTONE - All individual modules considered "Roughly Working" with hardware interfaced
    • Completed
    6 04/05/2023 04/11/2023
    • Finalize the DBC file for project
    • Create a detailed schedule for remaining tasks, dividing work into four milestones
    • Start RPM sensor logic implementation and add it to Motor controller
    • Integrate Bluetooth module to Bridge/Sensor controller, with UART logic
    • Work on integrating the MaxBotix ultrasonic sensor with the sensor module
    • Work on Stage-1 mounting of all components on the RC car with temporary fixing
    • Fix problem with BDC-DBF conversion on BusMaster and show graphs on it
    • MILESTONE - Basic car driving ability with basic obstacle avoidance
    • Completed
    7 04/12/2022 04/18/2022
    • Complete basic working Mobile App which connects to the bridge controller, sends a test message and receives sensor values
    • Work on calibrating compass sensor to get accurate bearing readings
    • Create a on-board battery power supply for all components
    • Work on Stage-2 mounting of all components on the RC car with soldering of parts and wires
    • Complete the Compass calibration and read accurate readings from it
    • Have PWM signals reliably controlling the motor speed
    • Start working on reliable navigation with obstacle avoidance
    • MILESTONE - Integrated, reliably "heading" towards provided destination bearing, basic obstacle avoidance
    • Completed
    8 04/19/2023 04/25/2023
    • Send fake destination coordinates from Mobile app and start and stop commands
    • Integrate LED display to the driver controller and show current heading, speed on it
    • Add a GPS Lock LED on the Geo controller
    • Add more LEDs on various SJ2 boards for more debug information for MIA, obstacle detection, etc
    • Work on getting the car pass the Ramp test
    • Work on Stage-3 permanent fixing of all components on the RC car
    • Outdoor testing for longer range trips, and complete necessary enhancements
    • MILESTONE - Integration part 2, perform obstacle avoidance and destination bearing
    • Completed
    9 04/26/2023 05/02/2023
    • Integrate Google Maps on Mobile App for destination coordinates
    • Show debug information (GPS Coordinates, Sensor Values, Values from Compass, Calculated Distance, Motor Speed) on App and LED screen
    • Work on getting the car to pass the U-turn test
    • Verify that the electrical and mechanical work is complete
    • MILESTONE - Integration and outdoor testing, adding necessary software changes
    • Completed
    10 05/03/2023 05/09/2023
    • Work on On/Off Button - power button to start the car
    • Enable the Headlights to the car
    • Work on robustness of the car, perform corner test cases in actual runs of the car
    • Start working on report writing of the project
    • MILESTONE - Integration testing, deal with uneven terrain, reliable waypoints navigation and obstacle avoidance
    • Completed
    11 05/10/2023 05/16/2023
    • Finish project report writing
    • Full System Testing, any needed Hardware and software fixes and optimizing
    • Completed
    11 05/23/2023 05/23/2023
    • Final Project Demo Day
    • Incomplete


    Parts List & Cost

    Item# Part Desciption Vendor Qty Cost
    1 RC Car Traxxas [1] 1 $251.51
    2 CAN Transceivers Amazon [2] 4 $43.72
    3 SJ-2 Board 4 $200.00
    4 LV-MaxSonar-EZ1 Ultrasonic Range Finder Amazon [3] 4 $131.20
    5 GPS Amazon [4] 1 $10.99
    6 RPM Sensor Amazon [5] 1 $16.76
    7 Buletooth Amazon[6] 1 $15.99
    8 LCD Display Amazon [7] 1 $10.99
    9 Battery/Charger 1 $62.95
    10 Cable Amazon [8] 1 $7.99
    11 LSM303AGR Compass Adafruit [9] 1 $19.57
    12 Magnet holder 1 $8.09
    13 2*20 header 1 $7.59
    14 RPM holder 1 $7.73
    15 long stand off 1 $2.21
    16 Mount board 1 None
    17 Protoboard 1 None
    18 Small stand off None
    19 Pin header None
    20 Switch for DC motor 1 None
    21 wire connectors 1 None


    Printed Circuit Board

    The Following table indicate the pin connection of all Hardware .

    CAN CLAN Car Pinout.png

    This is the picture shows protoboard.

    Image: 250 pixelsImage: 250 pixels



    CAN Communication

    <Talk about your message IDs or communication strategy, such as periodic transmission, MIA management etc.>

    Hardware Design

    <Show your CAN bus hardware design>

    CAN Transiver0.pngCAN Transiver1.jpg

    DBC File

    Gitlab link to our DBC file : https://gitlab.com/rashmi_sv/the_CAN_clan/-/blob/dev/dbc_file/dbc/project.dbc

    <You can optionally use an inline image>

    VERSION ""
    
    NS_ :
            BA_
            BA_DEF_
            BA_DEF_DEF_
            BA_DEF_DEF_REL_
            BA_DEF_REL_
            BA_DEF_SGTYPE_
            BA_REL_
            BA_SGTYPE_
            BO_TX_BU_
            BU_BO_REL_
            BU_EV_REL_
            BU_SG_REL_
            CAT_
            CAT_DEF_
            CM_
            ENVVAR_DATA_
            EV_DATA_
            FILTER
            NS_DESC_
            SGTYPE_
            SGTYPE_VAL_
            SG_MUL_VAL_
            SIGTYPE_VALTYPE_
            SIG_GROUP_
            SIG_TYPE_REF_
            SIG_VALTYPE_
            VAL_
            VAL_TABLE_
    
    BS_:
    
    BU_: DBG DRIVER GEO MOTOR SENSOR_BRIDGE
    
    
    BO_ 100 ULTRASONIC_TO_DRIVER: 5 SENSOR_BRIDGE
     SG_ ULTRASONIC_TO_DRIVER_left : 0|10@1+ (1,0) [0|511] "cm" DRIVER
     SG_ ULTRASONIC_TO_DRIVER_right : 10|10@1+ (1,0) [0|511] "cm" DRIVER
     SG_ ULTRASONIC_TO_DRIVER_front : 20|10@1+ (1,0) [0|511] "cm" DRIVER
     SG_ ULTRASONIC_TO_DRIVER_back : 30|10@1+ (1,0) [0|511] "cm" DRIVER
    
    BO_ 300 GPS_DESTINATION: 8 SENSOR_BRIDGE
     SG_ GPS_DEST_LATITUDE_SCALED_100000 : 0|32@1- (1,0) [0|0] "Degrees" GEO
     SG_ GPS_DEST_LONGITUDE_SCALED_100000 : 32|32@1- (1,0) [0|0] "Degrees" GEO
    
    BO_ 50 DRIVE_STATUS_CMD: 1 SENSOR_BRIDGE
     SG_ DRIVE_STATUS_CMD_start : 0|1@1+ (1,0) [0|0] "" MOTOR
    
    BO_ 600 SELF_TEST_CMD: 1 SENSOR_BRIDGE
     SG_ SELF_TEST_CMD_start : 0|1@1+ (1,0) [0|0] "" MOTOR, GEO, DRIVER
    
    
    BO_ 200 DRIVER_TO_MOTOR: 2 DRIVER
     SG_ DRIVER_TO_MOTOR_steer : 0|8@1- (1,0) [0|0] "degrees" MOTOR, SENSOR_BRIDGE
     SG_ DRIVER_TO_MOTOR_speed : 8|8@1- (1,0) [0|50] "mph" MOTOR, SENSOR_BRIDGE
    
    BO_ 610 DRIVER_SELF_TEST_RESULT: 1 DRIVER
     SG_ DRIVER_SELF_TEST_RESULT_status : 0|8@1+ (1,0) [0|0] "" SENSOR_BRIDGE
    
    
    BO_ 400 GEO_STATUS: 8 GEO
      SG_ GEO_STATUS_COMPASS_HEADING : 0|12@1+ (1,0) [0|359] "Degrees" DRIVER, SENSOR_BRIDGE
      SG_ GEO_STATUS_COMPASS_BEARING : 12|12@1+ (1,0) [0|359] "Degrees" DRIVER, SENSOR_BRIDGE
      SG_ GEO_STATUS_DISTANCE_TO_DESTINATION : 24|16@1+ (0.1,0) [0|0] "Meters" DRIVER, SENSOR_BRIDGE
      SG_ GEO_STATUS_SATELLITE_LOCKED : 40|1@1+ (1,0) [0|0] "" DRIVER, SENSOR_BRIDGE
    
    BO_ 620 GEO_SELF_TEST_RESULT: 1 GEO
     SG_ GEO_SELF_TEST_RESULT_status : 0|8@1+ (1,0) [0|0] "" SENSOR_BRIDGE
    
    BO_ 650 GEO_CURRENT_COORDS: 8 SENSOR_BRIDGE
     SG_ CURR_LATITUDE_SCALED_100000 : 0|32@1- (1,0) [0|0] "Degrees" SENSOR_BRIDGE
     SG_ CURR_LONGITUDE_SCALED_100000 : 32|32@1- (1,0) [0|0] "Degrees" SENSOR_BRIDGE
    
    
    BO_ 500 MOTOR_TO_APP_DBG: 2 MOTOR
     SG_ MOTOR_TO_APP_DBG_current_steer : 0|8@1- (1,0) [0|0] "degrees" SENSOR_BRIDGE
     SG_ MOTOR_TO_APP_DBG_current_speed : 8|8@1- (1,0) [0|50] "mph" SENSOR_BRIDGE
    
    BO_ 620 MOTOR_SELF_TEST_RESULT: 1 MOTOR
     SG_ MOTOR_SELF_TEST_RESULT_status : 0|8@1+ (1,0) [0|0] "" SENSOR_BRIDGE
    
    
    CM_ BU_ DRIVER "The LED display and driver controller driving the car";
    CM_ BU_ MOTOR "The RPM sensor, DC and servo motor controller of the car";
    CM_ BU_ SENSOR_BRIDGE "The Bluetooth and the sonar sensor controller of the car";
    CM_ BU_ GEO "The GPS and compass sensor controller of the car";
    
    BA_DEF_ "BusType" STRING ;
    BA_DEF_ BO_ "GenMsgCycleTime" INT 0 0;
    BA_DEF_ SG_ "FieldType" STRING ;
    
    BA_DEF_DEF_ "BusType" "CAN";
    BA_DEF_DEF_ "FieldType" "";
    BA_DEF_DEF_ "GenMsgCycleTime" 0;
    
    BA_ "GenMsgCycleTime" BO_ 100 1000;
    BA_ "GenMsgCycleTime" BO_ 200 50;
    
    


    Sensor ECU

    <Picture and link to Gitlab> Sensor Node GitLab

    Sensor00.pngSensor1.jpg


    Hardware Design

    • MaxSonar-EZ1 detects objects from 0" to 254".
    • 2.5-5.5V operation range. Low 2mA supply current.
    • 42kHz Ultrasonic sensor with 20Hz reading rate.
    • Incredibly Small Package Sonar Range Finder.
    • Serial Output, PWM output, Analog Output.

    Software Design

    <List the code modules that are being called periodically.>

    Technical Challenges

    < List of problems and their detailed resolutions>

    • Issue: Sensors test well independently, but not sensitive when mount on RC car .
    • Reason: Sensor do not have enough power supply.
    • Solution: 1.check connecting and solder in protoboard.
    • 2.Re-design the power supply plan.


    • Issue: While using two brand sensors, Front sensor works well, but left/right sensor working randomly. For sensors couldn’t work well at the same time.
    • Reason: We config the sensor in two groups, and it causes the sensors to crosstalk.
    • Solution: 1. Only use one brand.
    • 2.Turning on only two sensors at a time.(left + right then front +rear).


    • Issue: Rear Sensor doesn't work well with bad mounting.
    • Reason: the sensors are mounted heading to LCD.
    • Solution: we use higher stand off of read sensor.


    Motor ECU

    <Picture and link to Gitlab> Motor Controller Link

    Hardware Design

    Image: 250 pixels

    A single SJ2-C board was placed in charge of handling all interactions with the Traxxas parts. This included an ESC (Electronic Speed Control) connected to a brushed DC motor, a servo motor for steering control, and a wheel encoder installed adjacent to the gear shaft (CHECK).

    Software Design

    <List the code modules that are being called periodically.>

    Technical Challenges

    < List of problems and their detailed resolutions>



    Geographical Controller

    <Picture and link to Gitlab> GPS Node GitLab

    • GPS

    GPS1.jpgGPS2.jpg

    • An Adafruit Ultimate GPS breakout module using the MTK3339 chipset is interfaced over UART to the Geographical controller to provide latitude and longitude updates.
    • Compass

    Compass11.jpg

    • Triple-axis accelerometer/magnetometer compass module. Inside are two sensors, one is a classic 3-axis accelerometer, which can tell you which direction is down towards the Earth (by measuring gravity). The other is a magnetometer that can sense where the strongest magnetic force is coming from, generally used to detect magnetic north.

    Hardware Design

    Software Design

    <List the code modules that are being called periodically.>

    Technical Challenges

    < List of problems and their detailed resolutions>





    Communication Bridge Controller & LCD

    <Picture and link to Gitlab>

    • LCD

    LCD0.pngLCD11.jpg

    • An Adafruit Ultimate GPS breakout module using the MTK3339 chipset is interfaced over UART to the Geographical controller to provide latitude and longitude updates.

    Hardware Design

    Software Design

    <List the code modules that are being called periodically.>

    Technical Challenges

    < List of problems and their detailed resolutions>



    Master Module

    <Picture and link to Gitlab>

    Hardware Design

    Software Design

    <List the code modules that are being called periodically.>

    Technical Challenges

    < List of problems and their detailed resolutions>



    Mobile Application

    <Picture and link to Gitlab>

    Hardware Design

    Software Design

    <List the code modules that are being called periodically.>

    Technical Challenges

    < List of problems and their detailed resolutions>






    Conclusion

    <Organized summary of the project>

    <What did you learn?>

    Project Video

    Project Source Code

    Advise for Future Students

    <Bullet points and discussion>

    Acknowledgement

    === References ===